03-20-2007, 03:36 PM
|
#1
|
|
Administrator
Join Date: Sep 2002
Location: Saratoga Springs, UT
Posts: 17,931
|
Pin Drive Wheel Gallery
Lets start with Rick Harper from Tallahassee FL: 
Click on image to go to technical thread.
Last edited by Larry N. Johnson; 01-05-2008 at 09:50 PM.
|
|
|
|
03-20-2007, 04:25 PM
|
#2
|
|
Senior Member
Join Date: Jan 2002
Posts: 4,399
|
Holy smokes, that car looks good! It would be nice to the details like;
MKI, MKII, MKIII?
what size tires?
IRS?
Whose wheels?
|
|
|
|
|
03-20-2007, 04:37 PM
|
#3
|
|
FFCobra Fanatic
FFCobra Captain
Join Date: Jan 2002
Location: Hopkinton, MA
Posts: 3,639
|
Perfect tire fit! Still inside the body but right to the edge. Looks like the butt is dropped (front/back opennings of the r wheel well look closed up a bit).
__________________
jack
my Cobra IS real...just not old!
|
|
|
|
|
03-20-2007, 05:24 PM
|
#4
|
|
Senior Member
Join Date: Sep 2003
Location: San Francisco Bay Area, CA
Posts: 1,510
|
Hey Larry,
Do mine count?
I wanted the deep dish look with 17" wheels, so I opted for the Team III wheels with pin drive width IRS and tubular LCA. Also went with the stud covers so I could have the look of real pin drive wheels without the possibility of a loose spinner.
Curtis
__________________
Kit Received 12/4/03, 1st go-kart ride 6/10/05, titled on 1/21/06 - stack-injected 408W, pin-drive with Team III wheels.
|
|
|
|
|
03-20-2007, 06:10 PM
|
#5
|
|
Administrator
Join Date: Sep 2002
Location: Saratoga Springs, UT
Posts: 17,931
|
Curtis,
You have pin drive width; we are looking for pin drive actual. Are you on the 17" bolt on gallery?
Todd,
The Rick Harper car is 295/50x15 size. You can click on the link for more details.
Larry
|
|
|
|
|
03-21-2007, 02:24 AM
|
#6
|
|
Junior Charter Member
Join Date: Dec 2002
Location: North Branch MN
Posts: 231
|
390 FE big block MKII Trigo's:
[ March 21, 2007, 05:50 AM: Message edited by: Larry N. Johnson ]
|
|
|
|
|
03-21-2007, 03:39 AM
|
#7
|
|
Moderator
Join Date: Jan 2002
Location: oakland,ca.
Posts: 7,058
|
Larry, here's my 17" PS Engineering pin drive coupe.
More images at website in signature line.
Last edited by Larry N. Johnson; 02-26-2009 at 04:20 PM.
Reason: fixed link.
|
|
|
|
|
03-21-2007, 04:10 PM
|
#8
|
|
Administrator
Join Date: Sep 2002
Location: Saratoga Springs, UT
Posts: 17,931
|
Allen English aka ACE from Portland, OR:
Trigos
|
|
|
|
|
03-21-2007, 08:22 PM
|
#9
|
|
Administrator
Join Date: Sep 2002
Location: Saratoga Springs, UT
Posts: 17,931
|
Yours truly from Saratoga Springs, UT
The picture taken was at Mt. Timpanogas Alpine Loop 11/4/04.
Rims are real magnesium Halibrand "Cobra II" with 4" backspace and 3/8" Trigo adapters for a net backspace of 3 5/8". Spinners are polished forged aluminum anodized gold.
IRS rear suspension is FFR "pin drive width" with front FFR lower control arms, also "pin drive width".
Rear spindles and brakes are 1990 T-Bird; front Spindles and brakes are 1990 Mustang 5.0. Front hub/rotors are 1990 Lincoln Mk VII.
Tires are Goodyear Eagle GTII 295/50R15 and 236/60R15.
Body and frame FFR Mark II, "Old 3850".
|
|
|
|
|
03-23-2007, 05:30 PM
|
#10
|
|
Administrator
Join Date: Sep 2002
Location: Saratoga Springs, UT
Posts: 17,931
|
David Smith, FFR President
Trigo 15" pin drive rims
FFR Mk II w/ IRS
Goodyear 295/50x15 and 235/60x15 Tires
Click on image for more pictures
|
|
|
|
|
09-10-2007, 12:53 AM
|
#11
|
|
Administrator
Join Date: Sep 2002
Location: Saratoga Springs, UT
Posts: 17,931
|
Griff Johnson - Utah
After car finished, wheel chrome plated, spinners gold, BFG's traded for M/T's:
Last edited by Larry N. Johnson; 03-17-2008 at 02:58 AM.
Reason: added second image
|
|
|
|
|
10-11-2007, 05:56 AM
|
#12
|
|
Senior Member
FFCobra Craftsman
Join Date: Jan 2007
Location: So Cal
Posts: 1,254
|
Can you run Pin Drives on a 3 link or do you need IRS?
__________________
Ordered complete kit on 10/08/07. Delivered 11/25/07. FE, TKO 600, 3 link, & classic gauges, and big fat 15" rubber.
|
|
|
|
|
10-11-2007, 07:22 AM
|
#13
|
|
Charter Member
FFCobra Major
Join Date: Sep 2002
Location: Phx, Az
Posts: 6,250
|
Yes but you have to narrow the rear end.
__________________
I'd have finished a long time ago if I knew they were this fun!
FFR 4888: Street Cobra: No Scoop, No Pipes, No Rollbar.
302, TW heads, E-cam, Edlebrock intake and carb.
|
|
|
|
|
10-11-2007, 09:49 AM
|
#14
|
|
FFR Craftsman
Join Date: Nov 2005
Location: Madera County foothills, Ca
Posts: 581
|
Here is my MKIII with Trigo 15" pin drive rims, Team III forged spinners and adapters, and 235/60/R15 & 295/50/R15 Goodyear Eagle GT II tires. The rear end is a 9" Ford narrowed to 54.25 by Currie, 3 link setup, 31 spline axles,3.50 Trac Lok, and FFR front upper and lower tube A-arms. Larry, do you like the color?  [/url][/IMG]
[ October 11, 2007, 04:59 AM: Message edited by: CobraSnake7 ]
__________________
FFR5505 MKIII Del 6/26/06 Non donor build.First legal drive in primer 1-2-07.429SCJ,4bolt mains,CompCam.585 lift,roller tip rockers,3/8 pushrods,KB pistons,etc.850Barry Grant Mighty Demon DP,Tremic600, 9"Currie with 31 spline axles w/3.00 TrueTrac,3 link,15"Trigo 5 pin,Eagle GTII 235/295,Koni's on all 4, electric water pump,SC dash with Autometer vintage guages,FFR front lower control arms,17 gal alum gas tank,many other options. Painted by me @8-25-07,1998 Rolls Royce Royal Blue Pearl,with white pearl stripes.
|
|
|
|
|
10-11-2007, 09:55 PM
|
#15
|
|
Administrator
Join Date: Sep 2002
Location: Saratoga Springs, UT
Posts: 17,931
|
Yes I do like the color...what is it?
(Like the tires and wheels, too)
|
|
|
|
|
10-12-2007, 03:46 AM
|
#16
|
|
Senior Member
FFCobra Craftsman
Join Date: Jan 2007
Location: So Cal
Posts: 1,254
|
Great job on the paint. I might try painting mine too. Any ballpark on what Currie should charge to cut up the 8.8 to fit the pin drives?
__________________
Ordered complete kit on 10/08/07. Delivered 11/25/07. FE, TKO 600, 3 link, & classic gauges, and big fat 15" rubber.
|
|
|
|
|
10-19-2007, 07:13 AM
|
#17
|
|
FFR Craftsman
Join Date: Nov 2005
Location: Madera County foothills, Ca
Posts: 581
|
Larry:
Check the paint on your own car for the answer. I talked to you at Huntington Beach after the Knotts' Berry Farm gathering this spring. I liked your color, so I did mine the same. My picture is not very good, so I will try to get some better ones soon.
__________________
FFR5505 MKIII Del 6/26/06 Non donor build.First legal drive in primer 1-2-07.429SCJ,4bolt mains,CompCam.585 lift,roller tip rockers,3/8 pushrods,KB pistons,etc.850Barry Grant Mighty Demon DP,Tremic600, 9"Currie with 31 spline axles w/3.00 TrueTrac,3 link,15"Trigo 5 pin,Eagle GTII 235/295,Koni's on all 4, electric water pump,SC dash with Autometer vintage guages,FFR front lower control arms,17 gal alum gas tank,many other options. Painted by me @8-25-07,1998 Rolls Royce Royal Blue Pearl,with white pearl stripes.
|
|
|
|
|
10-19-2007, 05:41 PM
|
#18
|
|
Administrator
Join Date: Sep 2002
Location: Saratoga Springs, UT
Posts: 17,931
|
Glad you like it. Nice car by the way!
|
|
|
|
|
10-20-2007, 04:32 PM
|
#19
|
|
Administrator
Join Date: Sep 2002
Location: Saratoga Springs, UT
Posts: 17,931
|
17" Pin Drive Rims
Walt Steele aka Rad22 from Charlotte, NC
Click on image to go to technical thread.
|
|
|
|
|
10-28-2007, 10:12 PM
|
#20
|
|
Administrator
Join Date: Sep 2002
Location: Saratoga Springs, UT
Posts: 17,931
|
Rick Terrill from Greensburg, PA
Click on image to go to technical thread !
15" Vintage Wheels
Last edited by Larry N. Johnson; 02-26-2009 at 04:23 PM.
Reason: describes wheels
|
|
|
|
|
10-30-2007, 01:42 AM
|
#21
|
|
Senior Member
FFCobra Captain
Join Date: Mar 2004
Location: Windsor Connecticut
Posts: 5,346
|
15" Vintage
|
|
|
|
10-30-2007, 11:41 PM
|
#22
|
|
Senior Charter Member
Join Date: Dec 2004
Location: Connecticut
Posts: 430
|
Pin drives on my Coupe.
Compomotive Wheels with Dunlop SP 8000's
10 X 17's w 315/35-17 Front.
11 X 17' w 335/35-17 Rears.
standard width IRS
http://autorazzi.com//showPic.php?al...e=100_1069.JPG
|
|
|
|
|
10-30-2007, 11:50 PM
|
#23
|
|
Moderator
Join Date: Apr 2005
Location: Corona del Mar, California
Posts: 4,858
|
...so you don't have to click the link above...
Beautiful coupe Sarge!
|
|
|
|
|
10-31-2007, 10:00 AM
|
#24
|
|
Senior Charter Member
Join Date: Dec 2004
Location: Connecticut
Posts: 430
|
David,
Thank you for your compliment on the Coupe. I think I finally figured out the photo posting.
This is the real "Sarge", sadly he does not have pin drive.
Rich [img]smile.gif[/img]
|
|
|
|
|
11-02-2007, 01:29 AM
|
#25
|
|
Administrator
Join Date: Sep 2002
Location: Saratoga Springs, UT
Posts: 17,931
|
Only 3 "pin drives" show on Old Sarge.
|
|
|
|
|
12-05-2007, 09:32 PM
|
#26
|
|
Charter Member
Join Date: Jun 2002
Location: Wayne, N.J.
Posts: 326
|
Compomotive 15", 245/60 in front, 275/60 in rear.
15" Vintage
John O
__________________
FFR1293-427W Street Car, no hood scoop, street car fill cap, dual quads, Tri-States body, Tremec TKO, 3-link 3.55 rear, Vintage Halibrand pin drive wheels, under car exhaust blah, blah, blah.
Last edited by jolsen42; 01-31-2009 at 02:23 PM.
|
|
|
|
|
12-06-2007, 01:52 AM
|
#27
|
|
Senior Charter Member
Join Date: Dec 2004
Location: Connecticut
Posts: 430
|
John,
Your ride is gorgeous!! What a great look. 
Remember to keep the greasy side down.
Rich
|
|
|
|
|
01-05-2008, 09:14 PM
|
#28
|
|
Administrator
Join Date: Sep 2002
Location: Saratoga Springs, UT
Posts: 17,931
|
Pin Drive 15"
Belongs to MIG snake from CT or CA
Click on image for more information!
Another image:
http://i231.photobucket.com/albums/e...Picture085.jpg
Last edited by Larry N. Johnson; 10-04-2008 at 10:21 PM.
Reason: added anothyer image link
|
|
|
|
|
02-26-2008, 03:07 AM
|
#29
|
|
Charter Member
Join Date: Feb 2005
Location: Manchester, New Hampshire
Posts: 302
|
Vintage Wheels.........................
Click on above image for more details.
__________________
Car sold. Preparing a 289 comp car using Webers, T10 4sp, IRS and FIA pin drive wheels.
Last edited by Larry N. Johnson; 02-26-2008 at 04:22 AM.
Reason: added bigger image
|
|
|
|
|
07-02-2008, 02:03 PM
|
#30
|
|
Administrator
Join Date: Sep 2002
Location: Saratoga Springs, UT
Posts: 17,931
|
Federalist
Car belongs to The Federalist Patriot from Central FL
|
|
|
|
|
07-28-2008, 12:44 AM
|
#31
|
|
Charter Member
Join Date: Apr 2002
Location: Covington, GA
Posts: 659
|
My Daytona coupe with PSE 17" Pin Drive Wheels
__________________
The Bopp Shop Coupe # 031 with 422" Windsor by Southern Automotive
Mk III # 5021 (SOLD)
Unique 427 Roadster with 482"FE by Southern Automotive
|
|
|
|
|
12-13-2008, 07:14 PM
|
#32
|
|
Administrator
Join Date: Sep 2002
Location: Saratoga Springs, UT
Posts: 17,931
|
15" Vintage
15" Vintage Wheels Pin Drive
Car owned by Terry Stapley (Shell Valley)
Close up of rear wheel:
|
|
|
|
|
12-13-2008, 07:16 PM
|
#33
|
|
Administrator
Join Date: Sep 2002
Location: Saratoga Springs, UT
Posts: 17,931
|
17" Vintage Wheels
17" Vintage Wheels
Car owned by Ian Hunter from the UK
|
|
|
|
|
12-19-2008, 02:20 PM
|
#34
|
|
Senior Member
Join Date: Dec 2004
Location: HERSHEY P.A.
Posts: 1,067
|
Ok here is the Hot rod Art T and I are building with 17" Ps wheels.
Later
Mark D
__________________
( THE TRAVELING BUILDER ) Working with and on factory Fives for 10 years. Helping others build their Dream cars. I travel to you and assist you in your build. Just P/M for my number.
|
|
|
|
|
01-27-2009, 04:59 AM
|
#35
|
|
Moderator
Join Date: Jan 2002
Location: Moorpark, CA
Posts: 22,399
|
Vintage Wheels BRM pin drive - 15x8 front and 15x14 rear
__________________
Bill D
FFR 3378 - $old
RCR GT40 Mk1 - $old
Now paying my son's college tuition for the next 5 years
Now collecting parts to build a period correct 289FIA with an FFR chassis
|
|
|
|
|
02-05-2009, 06:33 PM
|
#36
|
|
Administrator
Join Date: Sep 2002
Location: Saratoga Springs, UT
Posts: 17,931
|
Vintage Wheels
Bill D. - very nice car and the Vintage Wheels make it "look right"!!
Here is another set of 15" Vintage 427 Wheels:
Roadster owned by Jeff Gagnon from Manchester, NH USA
|
|
|
|
|
02-26-2009, 01:44 AM
|
#37
|
|
Administrator
Join Date: Sep 2002
Location: Saratoga Springs, UT
Posts: 17,931
|
More Vintage
Another set of 15" 427 S/C pin drive wheels:
Bob Nealy from Clermont, Florida
Another view:
Last edited by Larry N. Johnson; 02-26-2009 at 04:09 PM.
|
|
|
|
|
02-26-2009, 04:29 AM
|
#38
|
|
Charter Member
FFCobra Craftsman
Join Date: Dec 2004
Location: Clermont, Florida
Posts: 601
|
[quote=Larry N. Johnson;1860999]Another set of 15" 427 S/C Vintage Wheels:
Bob Nealy from Clermont, Florida
Sorry Larry told you wrong I went back and looked at my invoices and they are TRIGO's  I bet I am the only one on this form that does not know what rims he has on his car.
Bob
__________________
A non-doner IRS 351 soon to be black with gray strips
|
|
|
|
|
02-26-2009, 04:29 AM
|
#39
|
|
FAST 40
FFCobra Captain
Join Date: Mar 2002
Location: Fairview,OR.
Posts: 4,441
|
Some great looking cars.
|
|
|
|
|
02-26-2009, 04:09 PM
|
#40
|
|
Administrator
Join Date: Sep 2002
Location: Saratoga Springs, UT
Posts: 17,931
|
Wheels
Bob - okay corrected.
ACE - is your #31 on here?
|
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
|
| Thread Tools |
|
|
| Display Modes |
 Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT. The time now is 01:30 PM.
|
|
Mass-Flo EFI: |
 |
|
|
The Tire Rack |
 |
|
|
Intelligent Multiplex System: |
 |
|
|
Engine Factory: |
 |
|
|
Intercity Lines |
 |
|
|
Team 3 Wheels: |
 |
|
|
Midwest Classic Insurance: |
 |
|
|
|
|
FACTORY FIVE COUPE/SPYDER: |
|
|
|
|
|
|
FACTORY FIVE '33 HOT ROD: |
|
|
|
|
FACTORY FIVE COMPETITION: |
|
|
|
|
GENERAL FACTORY FIVE DISCUSSIONS: |
|
|
|
|
|
|
|
|
|
|
|
|
