09-17-2008, 04:07 AM
|
#1
|
|
Senior Member
FFCobra Major
Join Date: Nov 2005
Location: North Bend, WA
Posts: 6,994
|
Went to Reno for the Air Races and.......
Went to the Reno Air Races this past week and this followed me home:
Looks good in the shop with the Cobra:
It'll look like this when I'm done:
Acrosport II: Open cockpit, 2 wings, just as flying was meant to be...
Picked it up from a friend that lost interest and now races jets at Reno.
If you've never been to the races, it's awesome!!
__________________
Doug
MKII #3133 3:27 Pin Width IRS, Carb'd Explorer 302 w/GT40P Heads, 3550 Mid Shift, Power Brake Mod, Villager MC w/remote reservoir, 15" Torque Thrust D's, Heater, Seat Heaters, RF Wiring Harness, Tilt Front Mod, Full Width Roll Bar
Arrival: 11/26/06 (My Birthday) Roller: 4/20/08 First Start & Gokart: 10/18/08 Body back on for the first time since delivery: 1/18/09 Graduation: When it's finished!
Last edited by Stinson Pilot; 09-17-2008 at 02:58 PM.
|
|
|
|
09-17-2008, 05:10 AM
|
#2
|
|
Senior Member
FFCobra Master Craftsman
Join Date: Aug 2007
Location: Pacific Palisades California
Posts: 2,519
|
I've always been a fan of pylon racing but do they do that running jets? I thought just prop driven planes...? Gotta be a total rush to do too!
__________________
Ford 302, T-3550, 570 Street Avenger, 3.55's, IRS, BRAKES? WHAT BRAKES?!, Koni's, Torque Thrust, RPM, Twisted Wedge, Lexus Spectra Blue w/white/grey stripes and an "oh sh*t bar" for the GF to hold onto.
|
|
|
|
|
09-17-2008, 05:55 AM
|
#3
|
|
Senior Member
FFCobra Major
Join Date: Nov 2005
Location: North Bend, WA
Posts: 6,994
|
Don't tell my friend in Reno, but the jets are pretty boring. The unlimited props fly just as fast as the jets. The unlimiteds shake the ground, the jets sound like a quiet vacuum cleaner flying by.
Actually, they are all quite exciting to watch.
Rare Bear, F8F Grumman Bearcat:
Hawker Sea Fury:
Voodoo, P-51 Mustang:
Big Boss Man, Grumman F-7 Tigercat:
__________________
Doug
MKII #3133 3:27 Pin Width IRS, Carb'd Explorer 302 w/GT40P Heads, 3550 Mid Shift, Power Brake Mod, Villager MC w/remote reservoir, 15" Torque Thrust D's, Heater, Seat Heaters, RF Wiring Harness, Tilt Front Mod, Full Width Roll Bar
Arrival: 11/26/06 (My Birthday) Roller: 4/20/08 First Start & Gokart: 10/18/08 Body back on for the first time since delivery: 1/18/09 Graduation: When it's finished!
|
|
|
|
|
09-17-2008, 06:09 AM
|
#4
|
|
Senior Member
FFCobra Major
Join Date: Nov 2005
Location: North Bend, WA
Posts: 6,994
|
Formula 1 Racing:
Tigercat coming around the last pylon:
__________________
Doug
MKII #3133 3:27 Pin Width IRS, Carb'd Explorer 302 w/GT40P Heads, 3550 Mid Shift, Power Brake Mod, Villager MC w/remote reservoir, 15" Torque Thrust D's, Heater, Seat Heaters, RF Wiring Harness, Tilt Front Mod, Full Width Roll Bar
Arrival: 11/26/06 (My Birthday) Roller: 4/20/08 First Start & Gokart: 10/18/08 Body back on for the first time since delivery: 1/18/09 Graduation: When it's finished!
|
|
|
|
|
09-17-2008, 06:18 AM
|
#5
|
|
Flat Broke...
FFCobra Master Craftsman
Join Date: Nov 2006
Location: Salt Lake City, UT
Posts: 1,893
|
Looks like a lot of work!!  lol! Looks fun though!
THIS is a cool plane!
__________________
~Gary~
'01 Mustang GT Convertible - non-donor.
"It's not so important WHAT you choose to do in life...only that you choose..."
|
|
|
|
|
09-17-2008, 06:26 AM
|
#6
|
|
Senior Member
FFCobra Major
Join Date: Nov 2005
Location: North Bend, WA
Posts: 6,994
|
P-38 "Glacier Girl", P-51 Mustang & F-22 Raptor:
Nemisis:
A cool pic of Rare Bear, lots of engine, even less airframe:
T-6 Texans:
__________________
Doug
MKII #3133 3:27 Pin Width IRS, Carb'd Explorer 302 w/GT40P Heads, 3550 Mid Shift, Power Brake Mod, Villager MC w/remote reservoir, 15" Torque Thrust D's, Heater, Seat Heaters, RF Wiring Harness, Tilt Front Mod, Full Width Roll Bar
Arrival: 11/26/06 (My Birthday) Roller: 4/20/08 First Start & Gokart: 10/18/08 Body back on for the first time since delivery: 1/18/09 Graduation: When it's finished!
|
|
|
|
|
09-17-2008, 06:34 AM
|
#7
|
|
Senior Member
FFCobra Major
Join Date: Nov 2005
Location: North Bend, WA
Posts: 6,994
|
Yak 11:
Here ya go Tbirdnutt:
__________________
Doug
MKII #3133 3:27 Pin Width IRS, Carb'd Explorer 302 w/GT40P Heads, 3550 Mid Shift, Power Brake Mod, Villager MC w/remote reservoir, 15" Torque Thrust D's, Heater, Seat Heaters, RF Wiring Harness, Tilt Front Mod, Full Width Roll Bar
Arrival: 11/26/06 (My Birthday) Roller: 4/20/08 First Start & Gokart: 10/18/08 Body back on for the first time since delivery: 1/18/09 Graduation: When it's finished!
|
|
|
|
|
09-17-2008, 10:53 AM
|
#8
|
|
Senior Member
Join Date: May 2005
Location: Cape Cod MA
Posts: 1,571
|
Awesome pics Doug, thanks for sharing. The races have been on my things to see list for a long time, and photos like that have just moved it up the list.
Is that a Steen Skybolt you picked up?
Good luck
Brian
__________________
If people concentrated on the really important things in life, there'd be a shortage of fishing poles.
|
|
|
|
|
09-17-2008, 11:11 AM
|
#9
|
|
Senior Member
Join Date: Aug 2006
Location: Mooresville, NC
Posts: 3,227
|
Beautiful pics Doug! You may need a bigger place in Hendersonville for all the toys 
|
|
|
|
09-17-2008, 11:28 AM
|
#10
|
|
NeeditBadWantitWorse
Join Date: Jul 2006
Location: Clifton, TN
Posts: 3,440
|
Excellent pics!
Tell more about the biplane kit.
|
|
|
|
|
09-17-2008, 12:25 PM
|
#11
|
|
Senior Member
Join Date: Mar 2008
Location: Sumter SC
Posts: 310
|
You guys are killing me. Great pictures.
__________________
Nothing But The Truth!!!
|
|
|
|
|
09-17-2008, 01:01 PM
|
#12
|
|
Moderator
Join Date: Jan 2004
Location: A little town outside Rochester, NY.
Posts: 6,172
|
Doug,
Great pictures! ...and congrats on the Acrosport! It looks like you have your work cut out for you. Are there wings yet?
I agree on Reno. If you like aircraft or racing (and better yet, both), you owe it to yourself to go one year. You really won't believe it.
I remember how amazed I was the first time I saw the prop planes going by right in front of me while 'significantly' ahead of their noise. (like jets.)
R 
__________________
Robert, I really miss you man.
FFR Roadster Mark III, 500hp Small Block Chevrolet, 700R4 4 speed auto, BMW Imola Red with silver ghost flamed stripes by the immortal Batman
"There's nothing you can't do, only stuff you haven't done yet!"
|
|
|
|
|
09-17-2008, 01:31 PM
|
#13
|
|
Member
Join Date: Aug 2007
Location: California
Posts: 30
|
Every Motorhead should go to the Air Races at least once in there life. It really is something to see. Thx for the pics.
|
|
|
|
|
09-17-2008, 01:37 PM
|
#14
|
|
Jack of all trades - expert at nothing
FFCobra Captain
Join Date: Jul 2007
Location: Northshore MA
Posts: 3,927
|
Great pics
Reno & Osh Kosh are on my bucket list.
__________________
The "last" Spyder picked up (for now).#0039GT. And a '70 Cougar 351C needing attention.
|
|
|
|
|
09-17-2008, 05:24 PM
|
#15
|
|
Senior Member
Join Date: Jan 2005
Location: Olathe, KS
Posts: 7,042
|
I went to OshKosh this year for the first time. It was awesome! Nemesis is seriously FAST!
For anyone who wants to see tons of Oshkosh pics, view my photobucket account here (There are 20 or 30 pages to look through):
http://s22.photobucket.com/albums/b3...anham/2008EAA/
There was an awesome yellow Stinson there, with great history. Apparently, some famous pilot flew that plane, and signed it's log book in the 40s or 50s; I don't remember his name.
What was really awesome was the Rocket Racing League's exhibition race. Those things are LOUD!!!! I don't know where they are going to race, but I've got to go see them. Here's a pic:
__________________
FFR #5060RD: 302EFI | E-Cam | 3:73 | Ford E4 Red | Powerheads | Cobra Upper/Lower Intake | 24# inj | 155lph Pump | 65mm TB | 75mm MAF | 1.7 Roller Rockers | Underdrive Pulleys | VPM F/R Sway Bars | 290RWHP/333RWTQ ***SOLD, but planning the next one!!***
2002 Mustang GT Daily Driver. Bone stock 5-speed. Ready to make some performance upgrades...
BECOME A SUPPORTING MEMBER...KEEP FFCOBRA.COM GOING STRONG!!!
|
|
|
|
|
09-17-2008, 05:31 PM
|
#16
|
|
Arruminum
FFCobra Master Craftsman
Join Date: Dec 2003
Location: Utah
Posts: 2,834
|
Any pics of Dago Red? That team used to be based at the local airport, not sure if they still are.
Looks like you have a fun project on your hands!
__________________
Joe™
|
|
|
|
|
09-17-2008, 05:49 PM
|
#17
|
|
Moderator
Join Date: Jan 2002
Location: oakland,ca.
Posts: 7,058
|
Thanks for sharing, it's Great seeing Rare Bear back on the circut! That Tigercat is cool, love to see new airplanes out there racing.
|
|
|
|
|
09-17-2008, 07:27 PM
|
#18
|
|
Making progress......
FFCobra Master Craftsman
Join Date: Sep 2002
Location: Visalia, CA
Posts: 2,196
|
Every year I say I am going to go, and every year I don't for some reason..... Someday.....
__________________
Coupe #307 - 5-link, SAI mod, Levy DA Koni's, Levy bumpsteer, 6-piston Wilwood's in front, 4-piston in rear, Forte/Wilwood pedal assy, hybrid 8.8/9" rear end, VPM front bar, VPM/own design variable rear bar, and lot of other little things so far........
LEVY Stage 4 347 and HD T-5 trans is on the way!
Build photos here:
http://www.flickr.com/photos/1452688...7602234664316/
|
|
|
|
|
09-17-2008, 07:55 PM
|
#19
|
|
Senior Member
Join Date: Jul 2004
Location: Crete IL
Posts: 2,871
|
COOL!!! Thanks for sharing! 
Karl
|
|
|
|
|
09-17-2008, 09:13 PM
|
#20
|
|
Senior Member
FFCobra Major
Join Date: Nov 2005
Location: North Bend, WA
Posts: 6,994
|
Here ya go Slow8:
Placed 2nd in the Sunday Gold Race behind Strega with 474.305mph.
__________________
Doug
MKII #3133 3:27 Pin Width IRS, Carb'd Explorer 302 w/GT40P Heads, 3550 Mid Shift, Power Brake Mod, Villager MC w/remote reservoir, 15" Torque Thrust D's, Heater, Seat Heaters, RF Wiring Harness, Tilt Front Mod, Full Width Roll Bar
Arrival: 11/26/06 (My Birthday) Roller: 4/20/08 First Start & Gokart: 10/18/08 Body back on for the first time since delivery: 1/18/09 Graduation: When it's finished!
Last edited by Stinson Pilot; 09-17-2008 at 09:23 PM.
|
|
|
|
|
09-18-2008, 01:25 AM
|
#21
|
|
Senior Member
FFCobra Craftsman
Join Date: Feb 2008
Location: fuquay-varina,nc
Posts: 963
|
thanks for the picture very nice
|
|
|
|
|
09-18-2008, 05:21 AM
|
#22
|
|
FFCobra Craftsman
FFCobra Craftsman
Join Date: Mar 2002
Location: Eagle Rock, CA
Posts: 1,497
|
Very cool... Any Corsairs this year?
__________________
FFR2448K - "Yes, an original Mk.I" D'oh!
|
|
|
|
|
09-18-2008, 02:23 PM
|
#23
|
|
Senior Member
FFCobra Major
Join Date: Nov 2005
Location: North Bend, WA
Posts: 6,994
|
__________________
Doug
MKII #3133 3:27 Pin Width IRS, Carb'd Explorer 302 w/GT40P Heads, 3550 Mid Shift, Power Brake Mod, Villager MC w/remote reservoir, 15" Torque Thrust D's, Heater, Seat Heaters, RF Wiring Harness, Tilt Front Mod, Full Width Roll Bar
Arrival: 11/26/06 (My Birthday) Roller: 4/20/08 First Start & Gokart: 10/18/08 Body back on for the first time since delivery: 1/18/09 Graduation: When it's finished!
|
|
|
|
|
09-18-2008, 03:23 PM
|
#24
|
|
Senior Member
FFCobra Craftsman
Join Date: Oct 2005
Location: Hickory, NC
Posts: 1,147
|
SWEET! Those are awesome. Thanx.
Tony
|
|
|
|
|
09-18-2008, 03:29 PM
|
#25
|
|
Old Chevy Craftsman
FFCobra Captain
Join Date: Feb 2006
Location: Phenix City, Alabama
Posts: 4,523
|
God... those make me feel all warm and fuzzy. If that doesn't work as an alternative to "enhancement" meds, I don't know what would.
__________________
"Here is a check for the difference... Why didn't you just mail it?? We have a hovercraft!!"
|
|
|
|
|
09-18-2008, 06:17 PM
|
#26
|
|
Senior Member
Join Date: Aug 2003
Location: Ottawa, Canada
Posts: 10,917
|
Awesome pics and a very nice new toy Doug! Did you just get the airframe or are the wings/tail included? What engine do you plan?
Cheers, Rod
|
|
|
|
|
09-18-2008, 07:23 PM
|
#27
|
|
Senior Member
FFCobra Major
Join Date: Nov 2005
Location: North Bend, WA
Posts: 6,994
|
The tail feathers are a quick/easy build. I'll need to build the wings. Takes awhile to build all the ribs.
Hadn't decided on the engine yet. Would love to put a radial on it, http://www.rotecradialengines.com/0RotecR3600/R3600.htm, but will probably put an 0-360 on it.
Need to finish the Cobra first!
__________________
Doug
MKII #3133 3:27 Pin Width IRS, Carb'd Explorer 302 w/GT40P Heads, 3550 Mid Shift, Power Brake Mod, Villager MC w/remote reservoir, 15" Torque Thrust D's, Heater, Seat Heaters, RF Wiring Harness, Tilt Front Mod, Full Width Roll Bar
Arrival: 11/26/06 (My Birthday) Roller: 4/20/08 First Start & Gokart: 10/18/08 Body back on for the first time since delivery: 1/18/09 Graduation: When it's finished!
|
|
|
|
|
09-20-2008, 10:27 PM
|
#28
|
|
new
Join Date: Sep 2007
Location: Indio, CA
Posts: 142
|
Looks like you had a great time.I always hear that it is. A Lance Air Legacy I painted a few years ago placed 2nd in class last year piloted by Skip Holmes. The name of it is Double Red with "N" numbers that when looked at spell nsane.I would post a pic if I knew how but look up "Fast Glass" and watch the movie trailer.
t
|
|
|
|
|
09-21-2008, 04:04 AM
|
#29
|
|
Senior Member
FFCobra Major
Join Date: Nov 2005
Location: North Bend, WA
Posts: 6,994
|
Not my pic, but here's Skip last year in Race 4. 285mph in a Homebuilt airplane.
__________________
Doug
MKII #3133 3:27 Pin Width IRS, Carb'd Explorer 302 w/GT40P Heads, 3550 Mid Shift, Power Brake Mod, Villager MC w/remote reservoir, 15" Torque Thrust D's, Heater, Seat Heaters, RF Wiring Harness, Tilt Front Mod, Full Width Roll Bar
Arrival: 11/26/06 (My Birthday) Roller: 4/20/08 First Start & Gokart: 10/18/08 Body back on for the first time since delivery: 1/18/09 Graduation: When it's finished!
|
|
|
|
|
09-21-2008, 04:43 AM
|
#30
|
|
Senior Member
Join Date: Jan 2005
Location: Olathe, KS
Posts: 7,042
|
Is Skip in a Van's or a Lancair? I'm learing to identify aircraft, so be gentle.
By boss has a Van's RV-6A, and this looks similar, although his won't go anywhere near that speed.
Greg
__________________
FFR #5060RD: 302EFI | E-Cam | 3:73 | Ford E4 Red | Powerheads | Cobra Upper/Lower Intake | 24# inj | 155lph Pump | 65mm TB | 75mm MAF | 1.7 Roller Rockers | Underdrive Pulleys | VPM F/R Sway Bars | 290RWHP/333RWTQ ***SOLD, but planning the next one!!***
2002 Mustang GT Daily Driver. Bone stock 5-speed. Ready to make some performance upgrades...
BECOME A SUPPORTING MEMBER...KEEP FFCOBRA.COM GOING STRONG!!!
|
|
|
|
|
09-21-2008, 04:46 AM
|
#31
|
|
Senior Member
Join Date: Jan 2005
Location: Olathe, KS
Posts: 7,042
|
Doh! Just read the post, 2 above mine. Apparently, it's a Lancair. I was close!
Greg
__________________
FFR #5060RD: 302EFI | E-Cam | 3:73 | Ford E4 Red | Powerheads | Cobra Upper/Lower Intake | 24# inj | 155lph Pump | 65mm TB | 75mm MAF | 1.7 Roller Rockers | Underdrive Pulleys | VPM F/R Sway Bars | 290RWHP/333RWTQ ***SOLD, but planning the next one!!***
2002 Mustang GT Daily Driver. Bone stock 5-speed. Ready to make some performance upgrades...
BECOME A SUPPORTING MEMBER...KEEP FFCOBRA.COM GOING STRONG!!!
|
|
|
|
|
09-21-2008, 05:19 AM
|
#32
|
|
Senior Member
FFCobra Major
Join Date: Nov 2005
Location: North Bend, WA
Posts: 6,994
|
The RV6 is another fine homebuilt:
Just as a side note, homebuilt/experimental aircraft make up a little over 20% of the General Aviation fleet these days.
__________________
Doug
MKII #3133 3:27 Pin Width IRS, Carb'd Explorer 302 w/GT40P Heads, 3550 Mid Shift, Power Brake Mod, Villager MC w/remote reservoir, 15" Torque Thrust D's, Heater, Seat Heaters, RF Wiring Harness, Tilt Front Mod, Full Width Roll Bar
Arrival: 11/26/06 (My Birthday) Roller: 4/20/08 First Start & Gokart: 10/18/08 Body back on for the first time since delivery: 1/18/09 Graduation: When it's finished!
|
|
|
|
|
09-21-2008, 05:52 AM
|
#33
|
|
Moderator
Join Date: Feb 2002
Location: Carmichael, Ca
Posts: 2,984
|
__________________
FFR-4000, CHP 408ci./600hp, Wayne's Stack F.I. & Tec-3, T-600, IRS, Smith gauges, 17" Pin-Drive wheels, Whitby's rag top & paint by Ken Pike (SRP).
Last edited by Don DePontee; 09-21-2008 at 06:36 AM.
|
|
|
|
|
09-21-2008, 05:56 AM
|
#34
|
|
Moderator
Join Date: Feb 2002
Location: Carmichael, Ca
Posts: 2,984
|
__________________
FFR-4000, CHP 408ci./600hp, Wayne's Stack F.I. & Tec-3, T-600, IRS, Smith gauges, 17" Pin-Drive wheels, Whitby's rag top & paint by Ken Pike (SRP).
Last edited by Don DePontee; 09-21-2008 at 06:35 AM.
|
|
|
|
|
09-21-2008, 06:10 AM
|
#35
|
|
Senior Member
Join Date: Jan 2005
Location: Olathe, KS
Posts: 7,042
|
Don:
Awesome pics! Thanks for sharing! The Raptor is one seriously cool piece of machinery, isn't it?
Greg
__________________
FFR #5060RD: 302EFI | E-Cam | 3:73 | Ford E4 Red | Powerheads | Cobra Upper/Lower Intake | 24# inj | 155lph Pump | 65mm TB | 75mm MAF | 1.7 Roller Rockers | Underdrive Pulleys | VPM F/R Sway Bars | 290RWHP/333RWTQ ***SOLD, but planning the next one!!***
2002 Mustang GT Daily Driver. Bone stock 5-speed. Ready to make some performance upgrades...
BECOME A SUPPORTING MEMBER...KEEP FFCOBRA.COM GOING STRONG!!!
|
|
|
|
|
09-21-2008, 06:24 AM
|
#36
|
|
Moderator
Join Date: Feb 2002
Location: Carmichael, Ca
Posts: 2,984
|
__________________
FFR-4000, CHP 408ci./600hp, Wayne's Stack F.I. & Tec-3, T-600, IRS, Smith gauges, 17" Pin-Drive wheels, Whitby's rag top & paint by Ken Pike (SRP).
Last edited by Don DePontee; 09-21-2008 at 06:34 AM.
|
|
|
|
|
09-21-2008, 03:27 PM
|
#37
|
|
Senior Member
FFCobra Major
Join Date: Nov 2005
Location: North Bend, WA
Posts: 6,994
|
Great pics Don. I had trouble getting my camera to autofocus on the Raptor inflight. Guess the stealth technology works!
And Rare Bare is my all time favorite. Don't know what happened on Sunday, the Bear didn't race, it was smoking a bit when landing on Saturday.
__________________
Doug
MKII #3133 3:27 Pin Width IRS, Carb'd Explorer 302 w/GT40P Heads, 3550 Mid Shift, Power Brake Mod, Villager MC w/remote reservoir, 15" Torque Thrust D's, Heater, Seat Heaters, RF Wiring Harness, Tilt Front Mod, Full Width Roll Bar
Arrival: 11/26/06 (My Birthday) Roller: 4/20/08 First Start & Gokart: 10/18/08 Body back on for the first time since delivery: 1/18/09 Graduation: When it's finished!
|
|
|
|
|
09-21-2008, 04:16 PM
|
#38
|
|
Moderator
Join Date: Feb 2002
Location: Carmichael, Ca
Posts: 2,984
|
I have been a big fan of Rare Bear for a long time as well, it ran in the final on Sunday but was unable to finish. This photo is the last I saw of it:
Don
__________________
FFR-4000, CHP 408ci./600hp, Wayne's Stack F.I. & Tec-3, T-600, IRS, Smith gauges, 17" Pin-Drive wheels, Whitby's rag top & paint by Ken Pike (SRP).
|
|
|
|
|
09-21-2008, 05:02 PM
|
#39
|
|
Senior Member
FFCobra Major
Join Date: Nov 2005
Location: North Bend, WA
Posts: 6,994
|
Love it. I was there in 05' when the Bear won. Didn't run in 06' and I missed last year, another win for the Bear. Always a very competitive airplane.
I had to leave early on Sunday to get back home. Checked the results and saw that the Bear didn't place. I knew the smoke on Saturday was not gonna be good.
__________________
Doug
MKII #3133 3:27 Pin Width IRS, Carb'd Explorer 302 w/GT40P Heads, 3550 Mid Shift, Power Brake Mod, Villager MC w/remote reservoir, 15" Torque Thrust D's, Heater, Seat Heaters, RF Wiring Harness, Tilt Front Mod, Full Width Roll Bar
Arrival: 11/26/06 (My Birthday) Roller: 4/20/08 First Start & Gokart: 10/18/08 Body back on for the first time since delivery: 1/18/09 Graduation: When it's finished!
|
|
|
|
|
09-21-2008, 05:15 PM
|
#40
|
|
new
Join Date: Sep 2007
Location: Indio, CA
Posts: 142
|
double red pic
stinson pilot, thanks for posting the pic. thats a great shot i have the same one framed. the thing that followed you home looks like a bunch of work so i wish you the best of luck building that.
T.
|
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
|
| Thread Tools |
|
|
| Display Modes |
 Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is On
|
|
|
All times are GMT. The time now is 01:26 PM.
|
|
Mass-Flo EFI: |
 |
|
|
The Tire Rack |
 |
|
|
Intelligent Multiplex System: |
 |
|
|
Engine Factory: |
 |
|
|
Intercity Lines |
 |
|
|
Team 3 Wheels: |
 |
|
|
Midwest Classic Insurance: |
 |
|
|
|
|
FACTORY FIVE COUPE/SPYDER: |
|
|
|
|
|
|
FACTORY FIVE '33 HOT ROD: |
|
|
|
|
FACTORY FIVE COMPETITION: |
|
|
|
|
GENERAL FACTORY FIVE DISCUSSIONS: |
|
|
|
|
|
|
|
|
|
|
|
|
