We rolled the cars out to sweep up. This is my car, number
3035. |
We rolled out the two cars to sweep up the floors. This was
the first time that both 3035 and 3036 were up a rolling! We
installed the engine/tranny in 3035 shortly after this photo was
taken. |
This is Galt's car, number 3036. |
Check out the pedal box! Using the AC pedals and an
after-market gas pedal. |
Galt's wondering what's next... |
Steering wheel and shaft installed. |
Left rear photo. |
Hey Galt, what are you cutting? |
Installing the engine and transmission was very uneventful. It
took a whole 5 minutes. Everything lined up perfect and the
motor fit good. |
The motors now in. We are bolting it up and leveling it off.
Thanks for the help Ed! |
Engine install: Bill's job was to guide the transmission into place
and bolt the transmission into place. |
The engine and transmission are installed! |
The engine's in! High resolution picture, click to enlarge. |
3035 engine. |
Good front picture. |
Nice picture of the engine installed with the intake and K&N. |
Carl still can't believe it only took 5 minutes to bolt the engine/tranny
into the car. |
Just standing around admiring our work. |
Carl checking out his handy work. |
Front-end picture. |
Very nice picture of the motor. This one is worth looking at! |
Ahh.. the name says it all! High resolution picture of the Cobra
valve covers. |
Good left side photo. |
Bill and Carl work on the brake lines. This shows the front of
3035 very well. This is right before we installed the
radiator. |
Bill installing the rear panels so that we can put the body on. |
Battery cut-off and lines. |
Installing the rear panels. Good shot of the front end of 3035
with the engine installed. |
